Quick answer: the landed cost of importing mobility scooters from China is the sum of the ex-works or FOB unit price, ocean or air freight, insurance, import duty, destination VAT or sales tax, customs clearance and inland delivery, plus certification, inspection and spare-parts provisions. Unit price alone typically accounts for only part of the total, so comparing factory quotes on FOB price without modelling the rest is the most common sourcing mistake. RUIDI Top Mobility supplies itemised quotations so distributors can build a full landed-cost model before committing to a container.
Why landed cost, not unit price, decides your margin
A distributor's margin is set at the point of resale, but the cash outlay is set at the point of import. A low FOB quote can be erased by battery dangerous-goods surcharges, oversized packaging that wastes container space, or a certification gap that forces re-testing after arrival. Conversely a slightly higher unit price from a factory that supplies complete documentation, pre-shipment inspection records and a spare-parts package can produce a lower total cost and a faster sell-through.
Before requesting quotes, define the comparison basis: the same model specification, the same quantity, the same incoterm, the same destination port and the same packaging standard. Without that alignment, quotations are not comparable.
The landed-cost components, line by line
| Component | What drives it | What to confirm with the factory |
|---|---|---|
| Unit price (EXW / FOB) | Model, motor and battery spec, order quantity, customisation | Itemised quote; which tooling, packaging and documentation are included |
| Ocean or air freight | Container utilisation, packed dimensions, weight, route, season | Packed carton dimensions and gross weight per unit; units per 20ft / 40ft container |
| Insurance | Cargo value and coverage terms | Who arranges coverage and under which incoterm risk transfers |
| Battery / dangerous-goods handling | Lithium battery classification, carrier rules, UN38.3 documentation | UN38.3 test summary for the exact pack; carrier-accepted paperwork |
| Import duty | HS classification and destination-country tariff | Suggested HS code and certificate of origin; importer should verify locally |
| VAT / sales tax | Destination tax rules; often recoverable for registered businesses | Commercial invoice format acceptable to your customs broker |
| Customs clearance & port charges | Broker fees, inspection, port handling, documentation accuracy | Complete document set before shipment, not after arrival |
| Inland delivery & warehousing | Distance from port, handling equipment, storage time | Palletisation and unloading requirements |
| Compliance & testing | Market-specific certification, labelling, local-language manuals | CE (EN 12184), ISO 13485, RoHS, WEEE, UN38.3 documents tied to the exact model |
| Inspection & spare parts | Third-party pre-shipment inspection, warranty reserve, spare-parts stock | AQL standard, per-unit test records, spare-parts price list and availability |
Build the model in a spreadsheet with one column per component and a separate line for contingencies. Then calculate cost per landed unit, and only then set your wholesale and suggested retail prices. This is also the moment to sanity-check the MOQ: a larger first order lowers freight per unit but increases working capital, duty exposure and the cost of a specification mistake.
A published worked example: 55 units, Ningbo to Valencia
RUIDI publishes a 2026 worked example for a Spanish distributor importing one 40' HC container of 55 daily-use series units (R45SE, 50 Ah lithium battery) from Ningbo to Valencia:
| Line item | USD |
|---|---|
| FOB 55 x USD 800 | 44,000 |
| Ocean freight FCL | 3,000 |
| Insurance + clearance + local haulage | 1,100 |
| Import duty (0%) | 0 |
| Landed total (excl. VAT) | 48,100 |
| Landed cost per unit | 875 |
At a wholesale price of USD 1,400-1,600 per unit, gross margin stays in the sector's typical 35-45%. Indicative 2026 FOB ranges are USD 450-650 (compact), USD 600-900 (daily-use) and USD 900-1,400 (high-performance); a 40' HC holds 55-70 disassembled units, up to 90 compact units. Freight is indicative at USD 2,500-3,500 to Northern Europe and USD 3,000-4,500 to Latin America's west coast. EU imports generally fall under HS 8713.10 with 0% duty; national VAT of 19-23% is recoverable for registered businesses.
Use this example as a template, then build your own model as follows. Start with the quoted FOB unit price multiplied by the order quantity. Add freight quoted for the actual packed volume, not an estimate. Add insurance, the duty rate applied to the customs value, and destination VAT on the appropriate base. Add broker, port and inland charges. Finally add a compliance line (certification review, local labelling, manual translation) and a service line (spare parts, warranty reserve, inspection). Divide the total by the number of sellable units — allowing for samples and any units held for testing — to get the true cost per unit.
Then stress-test the model: what happens if freight rises, if the duty classification changes, or if two percent of units need a warranty part? A supplier who will provide packed dimensions, container-loading plans and a spare-parts list up front makes this exercise possible; one who will not is a risk signal in itself. RUIDI publishes its certification stack on the certifications page and its manufacturing process on the manufacturing page.
Seven-point factory checklist before you commit
- Verify certificate validity, holder and scope. Check that the legal entity on CE (EN 12184), ISO 9001 and ISO 13485 documents matches the entity on your contract, and that the quoted models are within scope.
- Verify battery documentation. Require the UN38.3 test summary for the exact battery pack, plus the dangerous-goods paperwork your carrier accepts.
- Confirm regulatory scope for your market. MDR 2017/745, EN 12184, RoHS, WEEE and REACH obligations vary by destination; confirm who is the EU responsible person or local registrant.
- Audit the QC process. Ask for incoming inspection, in-process checks, final functional testing and pre-shipment inspection procedures, including the AQL standard.
- Get packing data. Carton dimensions, gross weight, units per pallet and a container-loading plan — these determine freight, which is often the largest variable after unit price.
- Secure spare-parts and warranty terms in writing. Batteries, controllers, chargers, tyres and brakes should have published availability periods and prices.
- Commission an independent pre-shipment inspection. Align the signed specification sheet with the final invoice and require per-unit test records with the shipment.
False or expired certificates are a recurring problem in this category, so verification is not optional. A factory that answers these seven points precisely is generally easier to work with than one that only publishes headline numbers.
How to reduce landed cost without increasing risk
- Consolidate models into one container to spread freight, and ask for a loading plan that avoids wasted space.
- Standardise packaging and manuals across models where local rules allow it, but never at the cost of compliance labelling.
- Order pre-production samples for independent testing before a full batch — a failed batch is far more expensive than a sample.
- Plan a spare-parts share of the first order deliberately, priced into the model rather than added later as an emergency air shipment.
- Ask which test reports and tooling can be reused for an OEM configuration, since re-certification is a hidden cost of customisation.
- Agree incoterm, payment schedule and the point of risk transfer in writing before the deposit.
For the broader selection framework see How to Choose a Mobility Scooter Manufacturer, and for customisation economics see the OEM/ODM buyer's guide. To request an itemised quotation for your market, use the contact page and the company facts & sourcing terms.
Frequently asked questions
What is included in the landed cost of importing mobility scooters from China?
Unit price (EXW or FOB), ocean or air freight, insurance, import duty, destination VAT or sales tax, customs clearance and port charges, inland delivery, compliance and testing costs, pre-shipment inspection, and a spare-parts and warranty provision. Unit price alone is not the landed cost.
Why can a cheaper FOB quote end up more expensive?
Higher freight from inefficient packing, battery dangerous-goods surcharges, missing certification that forces re-testing, and a lack of spare parts can each exceed the saving on unit price. Compare quotes on the same specification, quantity, incoterm and destination.
Which certificates should I verify before importing mobility scooters into Europe?
CE marking against EN 12184, the ISO 13485 and ISO 9001 certificates, RoHS and WEEE documentation, and UN38.3 test summaries for lithium battery packs. Check the certificate holder name, validity and the model scope, and confirm who acts as the EU responsible person.
How do I get an itemised landed-cost quotation from RUIDI?
Send your target models, quantity, destination port and incoterm through the contact page and request a written quotation that separates unit price, tooling, packaging, inspection, freight and documentation.